20" Brand New Scotchman (Non-Ferrous Extrusion Cutting) Upcut Circular Cold Saw, Mdl. SUP-500 NF, Precision Miter Upcut Non-ferrous Saw, Safety Hood With Safety Switch That Will Not Allow Saw To Run With Hood Open, Blade Door With Safety Interlock Switch, Dual Palm Controll, Adjustable Feed Rate on Saw Head, (2) Horizontal Pneumatic Clamps, (2) Vertical Pneumatic Clamps, Capable Of Slotting, Moveable Back Fence For Larger Capacity, Coolant Tank With Mist Lubrication, One Gallon Concentrated Coolant, One 20" (500mm) Diameter, 120 Tooth Carbide Blade, One Blade Wrench, Air Hose, Base Designed As A Chip Collection With Two Chip Extraction Ports, Noise Level (DB 68), Adjustable Leveling Pads, (Scotchman) Warranty: Three Years On Parts, #SMSUP500NF

14" New Scotchman (VARIABLE SPEED, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 VSPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350VSPK

New-Scotchman-New Scotchman (VARIABLE SPEED, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 VSPK-SMCPO350VSPK-01

Stock No:#SMCPO350VSPK

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$11,090.00

14" Brand New Hydmech Automatic CNC Non-Ferrous Pivot Arm Cold Saw, Mdl. PNF350-2CNC, Semi-Automatic & Automatic Operation, Automatic Multi-Indexing with Automatic Kerf Compensation, Pneumatic Operating Saw Head Feed, Sawing Head can Tilt 45 Degrees Left, 2 Blade Speeds, Vises with Moveable Aluminum Jaws & Can Adjust Vertically, Rotating Table Mounted on Large Roller Bearing, 2 Pneumatic Operating Vises, Blade Drive Coupled Directly to Saw Head, Cutting Area Behind Protective Cover, Ergonomically Positioned CP Mounted on Articulating Arm, 1 Carbide Tipped Blade, #SMPNF3502CNC

Stock No:#SMPNF3502CNC

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" New Baileigh Abrasive Chop Saw, Mdl. AS-350M, MFG Number BA9-1000267, Cast Base and Head, #SMAS350M

New-Baileigh-New Baileigh Abrasive Chop Saw-AS-350M-BA9-1000267-SMAS350M-01

Stock No:#SMAS350M

Manufacturer: Baileigh

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$3,299.00

14" Brand New Hydmech Manual Pivot Arm Cold Saw, Mdl. P350, Manually Operated, Control Handle with Safety Spring Loaded Trigger, Saw Base, Vise Quick Clamp & Release Lever, Flood Coolant with Electrical Coolant Pump, 2 Blade Speeds, Movement of Head & Vise, Adjustable Manual Vise with Anti-Burr Clamp, Saw Head Miters 45 Degrees Left & 45 Degrees Right, Material Work Stop Rod for Multiple Cuts of Same Length, One Blade Included, #SMP350

Stock No:#SMP350

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Brand New Hydmech Semi-Automatic Column Cold Saw, Mdl. C350-2S, Semi-Automatic Operation, Heavy Duty Sawing Head, Manual Movement on Adjustable Precision Linear Rails, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, 4 Blade Speeds, Anti-Burr Clamp with Double Locking System, Vertical Pneumatic Vise, Pneumatic Horizontal Operating Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel includes Main Disconnect, Programmable Sawing Stroke, Saw Head Feed Rate Control, LED Display for Machine Diagnostics, Adjustable Material Stop with Ruler, Flood Coolant with Electrical Coolant Pump & Wash Down Hose, One Blade Included, #SMC3502S

Stock No:#SMC3502S

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Brand New Hydmch Manual Column Cold Saw, Mdl. C350-2AV, Manually Operated, Heavy Duty Sawing Head, Adjustable Dual Precision Linear Rails, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, 4 Blade Speeds, Foot Pedal Control with Emergency Stop, Pneumatic Operating Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel, LED Display for Machine Diagnostics, Material Work Stop Rod, Flood Coolant with Electrical Coolant Pump, One Blade Included, #SMC3502AV

Stock No:#SMC3502AV

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$9,000.00

14" Brand New Hydmech Automatic Column Cold Saw, Mdl. C350-2CNC, Automatic Operation, Feed Rate Control Dial, Automatic Multi-Indexing Up to 23" in Single Stroke, Manual Movement on Adjustable Dual Precision Linear Rails, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, Variable Blade Speed of 15 to 90 RPM, Anti-Burr Clamp with Double Locking System, Vertical Pneumatic Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel Includes Main Disconnect, Programmable Sawing Stroke, Digital Display, Flood Coolant with Electrical Coolant Pump, Wash Down Hose, Stores up to 99 jobs, One Blade Included, #SMC3502CNC

Stock No:#SMC3502CNC

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Brand New Hydmech Semi-Automatic Circular Cold Saw, Mdl. PNF350-2S, Semi-Automatic Operation, Pneumatic Operating Saw Head & Vises, Sawing Head can Tilt 45 Degrees Left, 2 Blade Speeds, Rotating Table Mounted on Roller Bearings, 2 Pneumatic Operating Devices, Vises with Moveable Aluminum Jaws & Can Adjust Vertically, Blade Drive Coupled to Saw Head, Cutting Area Behind Protective Cover, Automatic Coolant Lubrication Activates During Cut, 1 Carbide Tipped Blade, #SMPNF3502S

Stock No:#SMPNF3502S

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Brand New Hydmech Manual (Non-Ferrous) Pivot Arm Cold Saw, Mdl. PFF350-2AV, Manual Saw Head Movement, Sawing Head can Tilt 45 Degrees Left, 2 Blade Speeds, Rotating Table on Large Roller Bearings, 2 Pneumatic Operating Vises, Vises with Moveable Aluminum Jaws & Can Adjust Vertically, Blade Drive Coupled Directly to Saw Head, Safety Head Locking Device, Automatic Coolant Lubrication Activates During Cut, 1 Carbide Tipped Blade, #SMPNF3502AV

Stock No:#SMPNF3502AV

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

19" x 165" Used Jinpu Double Miter Semi-Auto Sliding Saw, Mdl. LJJ2AS-500x4200, #C5129

Used-Jinpu-Used Jinpu Double Miter Semi-Auto Sliding Saw-C5129-01

Stock No:#C5129

Manufacturer: Jinpu

Capacity: 6" X 6"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)
Double Miter

Condition: Used

$19,750.00

12" Used Soco Semi-Automatic Miter Cold Saw, Mdl. MC275AC, Semi Automatic Operation, Auto Cutting Cycle, Automatic Clamping, Manual Feed, Coolant System, #A2748

Used-Soco-Used Soco Semi-Automatic Miter Cold Saw-MC275AC-A2748-01

Stock No:#A2748

Manufacturer: Soco

Capacity: 12"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$4,000.00

13 - 1/2" Used Scotchman (NON-FERROUS, Circular Cold Saws) (For Cutting Aluminum, Brass, Copper, Plastics) High Speed, Mdl. CPO 350 NFPKPD, (1) Horizontal Hydraulic Clamp, 3 Phase Only, Power Clamping, Powered Automatic Head Feed, 230 Volt, Year(2006) #A6805

Used-Scotchman-Used Scotchman (NON-FERROUS, Circular Cold Saws) (For Cutting Aluminum, Brass, Copper, Plastics) High Speed-CPO 350 NFPKPD-A6805-01

Stock No:#A6805

Manufacturer: Scotchman

Capacity: 13 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$7,500.00

12" Used Dake Heavy Duty Semi Automatic Cold Saw, Mdl. MEP 350X Tiger, Automatic/Manual Air Vise, MEP Control, 350mm Blade, #A7049

Used-DAKE-Used Dake Heavy Duty Semi Automatic Cold Saw-MEP 350X Tiger-A7049-01

Stock No:#A7049

Manufacturer: DAKE

Capacity: 12"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$8,750.00

14-1/2" Use Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Year (2010) #A5696

Used-DAKE-Use Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head)-EUROMATIC 370S-A5696-01

Stock No:#A5696

Manufacturer: DAKE

Capacity: 14-1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$11,000.00

14" Used Doringer Cold Saw , Mdl. D350, #A7099

Used-Doringer-Used Doringer Cold Saw -D350-A7099-01

Stock No:#A7099

Manufacturer: Doringer

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$5,950.00

14" Used Soco Automatic Ferrous Cold Saw, Mdl. MC-350FA, Automatic Clamping, Automatic Feed, Automatic Cutting, Built In Precision Digital Readout, Coolant, #A3854

Used-Soco-Used Soco Automatic Ferrous Cold Saw-MC-350FA-A3854-01

Stock No:#A3854

Manufacturer: Soco

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$11,500.00

14" Used Soco Non Ferrous Sawing Machine, With Fully Automatic Feed and Cutting Cycle 1/4" - 27". Great for Brass, Aluminum and other Soft Materials, Mdl. MC-350NFA, Please Select, Air Vise, Automatic Hitch Feed from 1/4" - 27", #A6013

Used-Soco-Used Soco Non Ferrous Sawing Machine, With Fully Automatic Feed and Cutting Cycle 1/4

Stock No:#A6013

Manufacturer: Soco

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$8,500.00

26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydraulic Clamps, (1) Horizontal Hydraulic Clamp, One Shot Lube System, Coolant System, 16-20-25 V=m/min, Low Speeds Only! Second Speed Change Not Avail., #A4350

Used-Trennjaeger-Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw-PMC-8-A4350-01

Stock No:#A4350

Manufacturer: Trennjaeger

Capacity: 26"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$14,500.00