26" / 38 1/8" x 160" Brand New Acra Precision Engine Lathe, Mdl. 26160HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, Spindle Nose 4-1/8", #SM26160HR

26" x 120" Brand New Jet Precision Engine Large Spindle Bore Geared Head Lathe (ZH Series), Mdl. GH-26120ZH Series, Spindle Nose 4-1/8", Clutch Operated Headstock with All Headstock Gears Hardened & Ground, Universal Gearbox Allows Inch, Metric, Diametrical & Module Pitch Threads. No Change Gears Required, Meehanite Casting, Bed Ways are Induction Hardened & Ground, Full Length Splash Guard, Heavy Duty Tailstock & Quill, Rapid Power Traverse to Cross Slide & Carriage, Siemens Electrics, Drive Plate, 12" 3-Jaw Scroll Chuck with Top Reversing Jaws, Face Plate, 2 Steady Rests with Roller Bearings, Follow Rest, Large Capacity Steady Rest with Ball Bearing Tips, 5 Piece Quick Change Tool Post Set, Micro-Carriage Bed Stop, Fully Integrated Coolant System, LED Work Lamp, Electronic Chuck Key Holder, Fitted Top Mats to Hold Tooling, E-Stop on Carriage for Added Safety, Large Easy to Use Foot Brake, #SMGH26120ZH

Stock No:#SMGH26120ZH

Manufacturer: Jet

Capacity: 26" x 120"

Category: Lathes

Subcategory: Engine
Precision

Condition: New

Starting At:

$46,599.00

Finance as low as $955.75 Per Mo.*

14" x 40" Brand New Jet Engine Lathe With Stand & Foot Brake, Mdl. GH-1440B, MFG Number JT9-323440, Precision spindle roller bearings, High quality steel hardened gears in headstock, Lead Screw Cover, Cast iron Stand, Foot Brake comes standard, Emergency Stop within easy reach of the Operator, Chuck Guard, Electronic Chuck Key Docking Station, provides Operator safety as the Lathe will not turn without the chuck key being docked, Mounted on Cast Iron stand with foot pedal, coolant, chuck key docking station ready to use, Enclosed gearbox design provides smooth, quiet operation, Gap bed section provided for larger diameter work, Adjustable gibs are incorporated in the carriage & slideways, Gearbox gives wide range of inch & metric threading & feed capabilities with few gear changes, Compound and cross slide have backlash adjustment, Tailstock may be offset for turning tapers and include and inch/metric graduated quill, Spindle Spider available for ease of turning Gun barrels, STANDARD ACCESSORIES, 8" 3-Jaw Chuck, 8" 4-Jaw Chuck, Steady Rest with Roller Bearings, Follow Rest, Quick Change Toolpost, 5pc Set of Holders, LED Work Lamp, MT3 Live Center, MT-5/3 Sleeve, #SMGH1440B

Stock No:#SMGH1440B

Manufacturer: Jet

Capacity: 26"/37" x 120"

Category: Lathes

Subcategory: Engine

Condition: New

Starting At:

$12,389.00

26"/34" x 120" Brand New GMC Precision Gap Bed Lathe, Mdl. GML-26120, 12" 3-Jaw Chuck with Top Reversible Jaws, 20" 4-Jaw Chuck with Reversible Jaws, 24" Face Plate, 4-3/4" - 10-1/4" Large Steady Rest with Roller Jaws, 1" - 3" Follow Rest, Removable Gap, Foot Brake, Halogen Work Light, 4 Way Tool Post, 2 Dead Centers & 1 Reducing Sleeve, Thread Chasing Dial, Tool Box, Taper Turning Attachment (Installed), Coolant System, Oil Pump on Apron for all Guideways & Leadscrews, ISO 9001 Certified, Spindle Nose 4-1/8", 10" Drive Plate, 4 Way Rapid Traverse, Adjustable Mechanical Spindle Clutch, All Dual Inch/Metric Dials, Solid Cast Iron Machine Base, Automatic Lubrication System in Headstock & Feed Box, One Year Industrial Warranty for Parts, #SMGML26120

Stock No:#SMGML26120

Manufacturer: GMC

Capacity: 26"/34" x 120"

Category: Lathes

Subcategory: Engine

Condition: New

$33,850.00

Finance as low as $694.26 Per Mo.*

26"/34" x 80" Brand New GMC Precision Gap Bed Lathe, Mdl. 52986, 12" 3-Jaw Chuck with Top Reversible Jaws, 20" 4-Jaw Chuck with Reversible Jaws, 24" Face Plate, 4-3/4" - 10-1/4" Large Steady Rest with Roller Jaws, 1" - 3" Follow Rest, Removable Gap, Foot Brake, Halogen Work Light, 4 Way Tool Post, 2 Dead Centers & 1 Reducing Sleeve, Thread Chasing Dial, Tool Box, Taper Turning Attachment (Installed), Coolant System, Oil Pump on Apron for all Guideways & Leadscrews, ISO 9001 Certified, Spindle Nose 4-1/8", 10" Drive Plate, 4 Way Rapid Traverse, Adjustable Mechanical Spindle Clutch, All Dual Inch/Metric Dials, Solid Cast Iron Machine Base, Automatic Lubrication System in Headstock & Feed Box, One Year Industrial Warranty for Parts, #SMGML2680

Stock No:#SMGML2680

Manufacturer: GMC

Capacity: 26"/34" x 120"

Category: Lathes

Subcategory: Engine

Condition: New

$31,850.00

Finance as low as $653.24 Per Mo.*

26" / 35 3/8" x 160" Brand New Acra Precision Engine Lathe, Mdl. 26160ACH, 15" 3 Jaw Chuck, 20" 4 Jaw Chuck, Coolant System, 4 Way Tool Holder, Halogen Light, Steady & Follow Rest, Full Length Splash Guard, Spindle Nose 4-1/8", Face Plate, #SM26160ACH

Stock No:#SM26160ACH

Manufacturer: Acra

Capacity: 26" / 35 3/8" x 160"

Category: Lathes

Subcategory: Engine

Condition: New

$55,000.00

Finance as low as $1,128.05 Per Mo.*

26" / 38-1/8" x 200" Brand New Acra Precision Engine Lathe, Mdl. 26200HR, 15" 3 Jaw Chuck, Full Length Splash Guard, Coolant System, 4 Way Tool Holder, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, Spindle Nose 4-1/8", #SM26200HR

Stock No:#SM26200HR

Manufacturer: Acra

Capacity: 26" / 38-1/8" x 200"

Category: Lathes

Subcategory: Engine

Condition: New

$66,550.00

Finance as low as $1,364.94 Per Mo.*

28" / 40" x 60" Brand New Acra Gap Bed Big Bore Precision Engine Lathe, Mdl. SM2860SET, 20" 3 Jaw Chuck, Full Length Rear Splash Guard, Coolant System, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM2860SET

Stock No:#SM2860SET

Capacity: 28" / 40" x 60"

Category: Lathes

Subcategory: Engine

Condition: New

$61,250.00

Finance as low as $1,256.24 Per Mo.*

28" / 40" x 80" Brand New Acra Gap Bed Big Bore Precision Engine Lathe, Mdl. SM2880SET, 20" 3 Jaw Chuck, Full Length Rear Splash Guard, Coolant System, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM2880SET

Stock No:#SM2880SET

Capacity: 28" / 40" x 80"

Category: Lathes

Subcategory: Engine

Condition: New

$63,000.00

Finance as low as $1,292.13 Per Mo.*

28" / 40" x 120" Brand New Acra Gap Bed Big Bore Precision Engine Lathe, Mdl. SM28120SET, 20" 3 Jaw Chuck, Full Length Rear Splash Guard, Coolant System, Halogen Work Light, Steady Rest, Follow Rest, Rapid Travel, #SM28120SET

Stock No:#SM28120SET

Capacity: 28" / 40" x 120"

Category: Lathes

Subcategory: Engine

Condition: New

$71,250.00

Finance as low as $1,461.34 Per Mo.*

25" x 118" Used Whacheon Engine Lathe, Mdl. HL-630, Chip Tray, 6- Jaw Chuck (Heavy Duty), Tool Post, Mico Bed Stop, Steady Rest, Trav - A Dial On Carriage, #A6828

Used-Whacheon-Used Whacheon Engine Lathe-HL-630-A6828-01

Stock No:#A6828

Manufacturer: Whacheon

Capacity: 25" x 118"

Category: Lathes

Subcategory: Engine

Condition: Used

$26,500.00

Finance as low as $543.52 Per Mo.*

26"/34" x 120" Used GMC Precision Gap Bed Engine Lathe (Heavy Duty), Mdl. GT-26120, Sino Dro Mdl SD S6-2V, Steady Rest, 4 Jaw Chuck, Taper Attachment, Face Plate, 3 Jaw Chuck, Follow Rest, Inch - Metric Threading, 2- Foot Brakes, #A7060

Used-GMC-Used GMC Precision Gap Bed Engine Lathe (Heavy Duty)-GT-26120-A7060-01

Stock No:#A7060

Manufacturer: GMC

Capacity: 26"/34" x 120"

Category: Lathes

Subcategory: Engine

Condition: Used

$28,500.00

Finance as low as $584.54 Per Mo.*

30" x 118" Used Mazak Heavy Duty Oil Country Lathe With 12-1/2" Hole Thru Spindle, Mdl. Oil Country, (2) 24" 4 Jaw Chucks, Rapid Traverse, Taper Attachment, Chip Pan, Thread Dial, Push Button Control, Coolant System, Dual Chuck, Spindle Nose 12-1/2", #A5263

Used-MAZAK-Used Mazak Heavy Duty Oil Country Lathe With 12-1/2

Stock No:#A5263

Manufacturer: MAZAK

Capacity: 30" x 118"

Category: Lathes

Subcategory: Engine

Condition: Used

$67,500.00

Finance as low as $1,384.43 Per Mo.*

35"/52" x 100" Used Eisen Heavy Duty Hollow Spindle Gap Bed Engine Lathe With Double Chuck and 10" Hole Thru Spindle, Mdl. PA35, GF 800 Digital Readout, #6 morse Taper, #6 morse Taper, Sliding Chuck Guard, Tool Post, Work Light, New Replacement Costs $115,000 With A 6 Month Wait. Buy It Today And Save Thousands!, #6 morse Taper, Double Chuck, Note Z Axis Dro Not Functional, New Coolant Pump with Internal Pump System, Year(2012) #A5212

Used-Eisen-Used Eisen Heavy Duty Hollow Spindle Gap Bed Engine Lathe With Double Chuck and 10

Stock No:#A5212

Manufacturer: Eisen

Capacity: 35"/52" x 100"

Category: Lathes

Subcategory: Engine

Condition: Used

$38,500.00

Finance as low as $789.64 Per Mo.*

39" x 168" Used Heavy Duty Leblond Engine Lathe, Mdl. 25" Raised, 36" T Slotted Face Plate, 4 Jaw Chuck, Taper Attachment, Warnet Electric Clutch Brake Combo., Hardened & Ground Bed Ways, 2- Steady Rests, 4 Way Rapid Traverse, 13" Bull Nose Center, Face Plate, #A5796

Used-LeBlond Regal-Used Heavy Duty Leblond Engine Lathe-25

Stock No:#A5796

Manufacturer: LeBlond Regal

Capacity: 39" x 168"

Category:

Subcategory: Engine

Condition: Used

$39,500.00

Finance as low as $810.15 Per Mo.*

40" X 200" Used Cadillac Geared Head Heavy Duty Gap Bed Engine Lathe, Mdl. 40200G, 4 Jaw Chuck, Steady Rest, Sony 2 Axis Readout System With X Axis Scale Only, Trav - A - Dial, One Shot Lube System, Foot Brake, Faceplate, Gap Bed, #A7270

Used-Cadillac-Used Cadillac Geared Head Heavy Duty Gap Bed Engine Lathe-40200G-A7270-01

Stock No:#A7270

Manufacturer: Cadillac

Capacity: 40" X 200"

Category: Lathes

Subcategory: Engine

Condition: Used

$57,500.00

Finance as low as $1,179.33 Per Mo.*

42"/49" x 172" Used Poreba Heavy Duty Gap Bed Engine Lathe, Mdl. TR100-B1, Live Center, Tool Post, Digital Readout, Steady Rest, Taper Attachment, Rapid Traverse On , Carraige, Cross Slide, Top Slide, 31" 4 Jaw Chuck, Work Light, Spindle Nose 4-3/4", #A4749

Used-POREBA-Used Poreba Heavy Duty Gap Bed Engine Lathe-TR100-B1-A4749-01

Stock No:#A4749

Manufacturer: POREBA

Capacity: 42"/49" x 172"

Category: Lathes

Subcategory: Engine

Condition: Used

$49,500.00

Finance as low as $1,015.25 Per Mo.*

44”/56” x 240" Used Clausing Gap Bed Engine Lathe (Great For Pipe Threading) (Great Condition), 33 ½" 4 jaw, 20" 3 jaw, 12 ½" Steady Rest, 18 ½" steady Rest, 6" hole through, #6 morse Taper, #C5247

Used-Clausing-Used Clausing Gap Bed Engine Lathe (Great For Pipe Threading) (Great Condition)---C5247-01

Stock No:#C5247

Manufacturer: Clausing

Capacity: 44”/56” x 240"

Category: Lathes

Subcategory: Engine

Condition: Used

$77,500.00

Finance as low as $1,589.53 Per Mo.*