14" Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. D-350, 58/108 RPM, Quick Acting Manual Vise, Coolant System, Stand, Horsepower: 3, Overload Protection Switch, Saw Blade, #SMD350

Starting At:

$18,850.00

14" New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 LT, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Made in the U.S.A, (Scotchman) Warranty: Three Years On Parts, #SMCPO350LT

New-Scotchman-New Scotchman (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 LT-SMCPO350LT-01

Stock No:#SMCPO350LT

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$8,390.00

14" New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 LTPKPD, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable of Slotting, Two (2) Speed Control, Hardened And Ground Worn And Wheel Gear Box, (Scotchman) Warranty: Three Years On Parts, #SMCPO350LTPKPD

New-Scotchman-New Scotchman (LOW TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 LTPKPD-SMCPO350LTPKPD-01

Stock No:#SMCPO350LTPKPD

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$12,690.00

14" Brand New Hydmech Semi-Automatic Circular Cold Saw, Mdl. PNF350-2S, Semi-Automatic Operation, Pneumatic Operating Saw Head & Vises, Sawing Head can Tilt 45 Degrees Left, 2 Blade Speeds, Rotating Table Mounted on Roller Bearings, 2 Pneumatic Operating Devices, Vises with Moveable Aluminum Jaws & Can Adjust Vertically, Blade Drive Coupled to Saw Head, Cutting Area Behind Protective Cover, Automatic Coolant Lubrication Activates During Cut, 1 Carbide Tipped Blade, #SMPNF3502S

Stock No:#SMPNF3502S

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Used Soco Non Ferrous Sawing Machine, With Fully Automatic Feed and Cutting Cycle 1/4" - 27". Great for Brass, Aluminum and other Soft Materials, Mdl. MC-350NFA, Please Select, Air Vise, Automatic Hitch Feed from 1/4" - 27", #A6013

Used-Soco-Used Soco Non Ferrous Sawing Machine, With Fully Automatic Feed and Cutting Cycle 1/4

Stock No:#A6013

Manufacturer: Soco

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$8,500.00

14" Brand New Hydmech Manual (Non-Ferrous) Pivot Arm Cold Saw, Mdl. PFF350-2AV, Manual Saw Head Movement, Sawing Head can Tilt 45 Degrees Left, 2 Blade Speeds, Rotating Table on Large Roller Bearings, 2 Pneumatic Operating Vises, Vises with Moveable Aluminum Jaws & Can Adjust Vertically, Blade Drive Coupled Directly to Saw Head, Safety Head Locking Device, Automatic Coolant Lubrication Activates During Cut, 1 Carbide Tipped Blade, #SMPNF3502AV

Stock No:#SMPNF3502AV

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Brand New Hydmech Automatic CNC Non-Ferrous Pivot Arm Cold Saw, Mdl. PNF350-2CNC, Semi-Automatic & Automatic Operation, Automatic Multi-Indexing with Automatic Kerf Compensation, Pneumatic Operating Saw Head Feed, Sawing Head can Tilt 45 Degrees Left, 2 Blade Speeds, Vises with Moveable Aluminum Jaws & Can Adjust Vertically, Rotating Table Mounted on Large Roller Bearing, 2 Pneumatic Operating Vises, Blade Drive Coupled Directly to Saw Head, Cutting Area Behind Protective Cover, Ergonomically Positioned CP Mounted on Articulating Arm, 1 Carbide Tipped Blade, #SMPNF3502CNC

Stock No:#SMPNF3502CNC

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Brand New Baileigh Variable Speed Inverter Driven Cold Saw, Mdl. CS-350EU, MFG Number BA9-1002535, 14" Blade, Variable Speed Inverter Driven, Digital Readout for RPM, Miters 45┬░ Left & Right, Taper Lock Vise, Direct Drive Gear Box, Steel Base, Coolant Pump, #SMCS350EU

Stock No:#SMCS350EU

Manufacturer: Baileigh

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$5,775.00

14" Brand New Baileigh Heavy Duty Manually Operated Cold Saw, Mdl. CS-350M, MFG Number BA9-1002569, 14" Blade, Manual Feed, Miters Up to 45┬░ Left & Right, Self Centering Vise, External Back Lash Adjustment, Flood Coolant System, #SMCS350M

Stock No:#SMCS350M

Manufacturer: Baileigh

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$8,879.00

14" Brand New Baileigh Heavy Duty Manually Operated Cold Saw with Pneumatic Vise, Mdl. CS-350P, MFG Number BA9-1002574, Pneumatic Centering Vise, Stop Mechanism, Heavy Cast Construction, Cuts Ferrous & Non-Ferrous Metals, External Back Lash Adjustment, Moveable Safety Guard, Foot Pedal, Flood Blade Cooling System, #SMCS350P

Stock No:#SMCS350P

Manufacturer: Baileigh

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$9,359.00

14" Brand New Baileigh Heavy Duty Manually Operated Aluminum Cutting Cold Saw , Mdl. CS-355M, MFG Number BA9-1002589, Cuts Non-Ferrous Metals, Miters Left & Right, Centering Vise, Heavy Cast Construction, Stop Mechanism, Flood Coolant System, #SMCS355M

Stock No:#SMCS355M

Manufacturer: Baileigh

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$9,549.00

14" Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw for Aluminum, Mdl. CS-355SA, MFG Number BA9-1002591, Cuts Non-Ferrous Metals, Miters Left & Right, Centering Vise, Heavy Cast Construction, Stop Mechanism, Flood Coolant System, 220V / 3-Phase, Foot Pedal, #SMCS355SA

Stock No:#SMCS355SA

Manufacturer: Baileigh

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$14,399.00

14" Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw , Mdl. CS-350SA, MFG Number BA9-1002578, Cuts Ferrous & Non-Ferrous Metals, 14" Blade, Pneumatic Centering Vise, Hydraulic Blade Descent, Automatic Shut Off & Vise Release, Stop Mechanism, Heavy Cast Construction, External Back Lash Adjustment, Foot Pedal, #SMCS350SA

Stock No:#SMCS350SA

Manufacturer: Baileigh

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$13,989.00

14" Brand New Baileigh Heavy Duty Vertical Semi-Automatic Column Type Cold Saw , Mdl. CS-C425SA, MFG Number BA9-1002633, Accepts up to 17" Blade, Semi-Automatic Operation, Dual Miter Swivel Head, Tool Gap Compensation Device, Automatic Blade Shut Off, Manual Back Gauge, Industrial Coolant System, Material Stop, Foot Pedal, #SMCSC425SA

Stock No:#SMCSC425SA

Manufacturer: Baileigh

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$24,849.00

14" Brand New DoALL Fully Automatic Circular Coldsaw, Mdl. SC-100A, PLC Control for Electric & Hydraulic Functions, Easy Conversational HMI, Infinity Variable Blade Speed Controlled by Inverter, Hydraulic Front & Vertical Vises, Floating Shuttle Device, Hydraulic Sorting Chute, Electro-Magnetic Powered Brake, Automatic Chip Conveyor, Power Wire Brush, Air Blow Device for Tube Cutting, Automatic Loading Table for Round Bar, Cutting Mist Oil - 5 Gallons, Work Light, Air Compressed Oil Mist, Feed System: Servo Motor & Ball Screw, One Set of Tools in a Tool Box, Instruction & Parts Manuals on CD, #SMSC100A

Stock No:#SMSC100A

Manufacturer: DoAll

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$155,300.00

Finance as low as $3,110.66 Per Mo.*

14" Brand Scotchman (POWER CLAMPING, POWERED DOWN FEED. AND VARIABLE SPEED 11-177 RPM), Mdl. CPO 350 PKPDVS, Miter Capabilities 45 degrees Left and 45 degrees Right, Semi-Automatic Cycle, Air Operated Power Double Self-Centering Vise Assures Burr-Free Cuts, Pneumatic Power Down Feed with Electric Controls, Miter Locking Devise: Quick, Accurate Setting-Stops at 45 degrees Left, Straight 90 Degrees, and 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened and Ground Worm and Wheel Gear Box, Worm Wheel of Top Quality Bronze, Chip Drawer, Warranty: Three Years on Parts, Made In The USA!, #SMCPO350PKPDVS

Stock No:#SMCPO350PKPDVS

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$13,990.00

14" Brand New Jet Industrial "Ferrous" Manual Cold Saw (For Cutting Ferrous Metals), Mdl. J-FK350-2K, MFG Number JT9-414214K, 350mm (14") Ferrous Cold Saw for steel, stainless and tough to cut alloys., Spring loaded whole hand trigger starts or stops the sawing process for easy smooth cutting and increased user safety, Quick tension and release mitering capabilities with stops at 45° right, 45° left, and 90° (center), capable of slotting, Two-piece cast iron blade guard system permits quick and easy blade changes without removing the guards, Hardened and ground worm screw and wheel drive gear box operates in an oil bath for added durability, Double self centering vise with adjustable gibs secures the material for burr free cuts, Heavy-Duty cast iron frame base with easy access storage provides a stable cuting platform, Thermal overload protection with magnetic starter for increased electrical safety, 30" adjustable length material stop, Made In Korea, #SMJFK3502K

Stock No:#SMJFK3502K

Manufacturer: Jet

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$7,799.00

14" Brand New Acra Manual (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. FHC 370T, Coolant, Adjustable Stop, Rotary Brush, Safety Guard, Tool Vise, #SMFHC370T

Stock No:#SMFHC370T

Manufacturer: Acra

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$6,215.00

14" Brand New Hydmech Automatic Column Cold Saw, Mdl. C350-2CNC, Automatic Operation, Feed Rate Control Dial, Automatic Multi-Indexing Up to 23" in Single Stroke, Manual Movement on Adjustable Dual Precision Linear Rails, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, Variable Blade Speed of 15 to 90 RPM, Anti-Burr Clamp with Double Locking System, Vertical Pneumatic Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel Includes Main Disconnect, Programmable Sawing Stroke, Digital Display, Flood Coolant with Electrical Coolant Pump, Wash Down Hose, Stores up to 99 jobs, One Blade Included, #SMC3502CNC

Stock No:#SMC3502CNC

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Brand New Hydmch Manual Column Cold Saw, Mdl. C350-2AV, Manually Operated, Heavy Duty Sawing Head, Adjustable Dual Precision Linear Rails, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, 4 Blade Speeds, Foot Pedal Control with Emergency Stop, Pneumatic Operating Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel, LED Display for Machine Diagnostics, Material Work Stop Rod, Flood Coolant with Electrical Coolant Pump, One Blade Included, #SMC3502AV

Stock No:#SMC3502AV

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$9,000.00

14" Brand New Hydmech Semi-Automatic Column Cold Saw, Mdl. C350-2S, Semi-Automatic Operation, Heavy Duty Sawing Head, Manual Movement on Adjustable Precision Linear Rails, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, 4 Blade Speeds, Anti-Burr Clamp with Double Locking System, Vertical Pneumatic Vise, Pneumatic Horizontal Operating Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel includes Main Disconnect, Programmable Sawing Stroke, Saw Head Feed Rate Control, LED Display for Machine Diagnostics, Adjustable Material Stop with Ruler, Flood Coolant with Electrical Coolant Pump & Wash Down Hose, One Blade Included, #SMC3502S

Stock No:#SMC3502S

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Brand New Hydmech Manual Pivot Arm Cold Saw, Mdl. P350, Manually Operated, Control Handle with Safety Spring Loaded Trigger, Saw Base, Vise Quick Clamp & Release Lever, Flood Coolant with Electrical Coolant Pump, 2 Blade Speeds, Movement of Head & Vise, Adjustable Manual Vise with Anti-Burr Clamp, Saw Head Miters 45 Degrees Left & 45 Degrees Right, Material Work Stop Rod for Multiple Cuts of Same Length, One Blade Included, #SMP350

Stock No:#SMP350

Manufacturer: HYDMECH

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" New Baileigh Abrasive Chop Saw, Mdl. AS-350M, MFG Number BA9-1000267, Cast Base and Head, #SMAS350M

New-Baileigh-New Baileigh Abrasive Chop Saw-AS-350M-BA9-1000267-SMAS350M-01

Stock No:#SMAS350M

Manufacturer: Baileigh

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$3,299.00

14" Used Soco Automatic Ferrous Cold Saw, Mdl. MC-350FA, Automatic Clamping, Automatic Feed, Automatic Cutting, Built In Precision Digital Readout, Coolant, #A3854

Used-Soco-Used Soco Automatic Ferrous Cold Saw-MC-350FA-A3854-01

Stock No:#A3854

Manufacturer: Soco

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$11,500.00

14" New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 SSPKPD, Powered Vise, Powered Down Feed, Double Self Centering Vise, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable of Slotting, (Scotchman) Warranty: Three Years On Parts, #SMCPO350SSPKPD

New-Scotchman-New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND POWER DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 SSPKPD-SMCPO350SSPKPD-01

Stock No:#SMCPO350SSPKPD

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$11,990.00

14" New Scotchman (VARIABLE SPEED, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 VSPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350VSPK

New-Scotchman-New Scotchman (VARIABLE SPEED, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 VSPK-SMCPO350VSPK-01

Stock No:#SMCPO350VSPK

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$11,090.00

14" New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 SSPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350SSPK

New-Scotchman-New Scotchman (SINGLE PHASE- ONE SPEED, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 SSPK-SMCPO350SSPK-01

Stock No:#SMCPO350SSPK

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$9,290.00

14" Brand New Scotchman (VARIABLE SPEED, MANUAL CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 VS, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350VS

Stock No:#SMCPO350VS

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$10,190.00

14" New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 SS, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350SS

New-Scotchman-New Scotchman (SINGLE PHASE- ONE SPEED, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 SS-SMCPO350SS-01

Stock No:#SMCPO350SS

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$8,390.00

14" New Scotchman (HIGH TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 HTPKPD, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened And Ground Worm And, (Scotchman) Warranty: Three Years On Parts, #SMCPO350HTPKPD

New-Scotchman-New Scotchman (HIGH TURN, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 HTPKPD-SMCPO350HTPKPD-01

Stock No:#SMCPO350HTPKPD

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$11,060.00

14" New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 HTPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened And Ground Worm And, Wheel Gear Box, (Scotchman) Warranty: Three Years On Parts, #SMCPO350HTPK

New-Scotchman-New Scotchman (HIGH TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 HTPK-SMCPO350HTPK-01

Stock No:#SMCPO350HTPK

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$8,560.00

14" New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 LTPK, Made in the U.S.A, Coolant Tank and Pump, (Scotchman) Warranty: Three Years On Parts, #SMCPO350LTPK

New-Scotchman-New Scotchman (LOW TURN, POWER CLAMPING AND MANUAL HEAD DOWN FEED) Circular Cold Saws (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 LTPK-SMCPO350LTPK-01

Stock No:#SMCPO350LTPK

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$8,960.00

14" New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 HT, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degree, Left, 90 Degrees And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Double Reduction, Hardened And Ground Worm And, Wheel Gear Box, (Scotchman) Warranty: Three Years On Parts, #SMCPO350HT

New-Scotchman-New Scotchman (HIGH TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics)-CPO 350 HT-SMCPO350HT-01

Stock No:#SMCPO350HT

Manufacturer: Scotchman

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$8,390.00

13 - 1/2" New Scotchman (NON-FERROUS, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 NF, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degrees, 90 Degrees Left And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Positive Cog Belt Driven, One Gallon Coolant Tank With Mist Lubrication System, (Scotchman) Warranty: Three Years On Parts, #SMCPO350NF

New-Scotchman-New Scotchman (NON-FERROUS, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)-CPO 350 NF-SMCPO350NF-01

Stock No:#SMCPO350NF

Manufacturer: Scotchman

Capacity: 13 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$9,990.00

12" Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. D300, Quick Acting Manual Vise, Double Hinged Safety Guards, Recirculating Coolant System (Reservoir In Base), Overload Protection Switch, Saw Blade, Robust Gear Box, #SMD300

Stock No:#SMD300

Manufacturer: Doringer

Capacity: 12"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$5,850.00

13 - 1/2" New Scotchman (NON-FERROUS, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 NFPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degrees, 90 Degrees Left And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Positive Cog Belt Driven, One Gallon Coolant Tank With Mist Lubrication System, (Scotchman) Warranty: Three Years On Parts, #SMCPO350NFPK

New-Scotchman-New Scotchman (NON-FERROUS, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)-CPO 350 NFPK-SMCPO350NFPK-01

Stock No:#SMCPO350NFPK

Manufacturer: Scotchman

Capacity: 13 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$10,590.00

13 - 1/2" New Scotchman (NON-FERROUS, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 NFPKPD, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degrees, 90 Degrees Left And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Positive Cog Belt Driven, One Gallon Coolant Tank With Mist Lubrication System, (Scotchman) Warranty: Three Years On Parts, #SMCPO350NFPKPD

New-Scotchman-New Scotchman (NON-FERROUS, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Aluminum, Brass, Copper, Plastics)-CPO 350 NFPKPD-SMCPO350NFPKPD-01

Stock No:#SMCPO350NFPKPD

Manufacturer: Scotchman

Capacity: 13 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$12,990.00

12-1/2" Brand New Baileigh European Style Manually Operated Cold Saw, Mdl. CS-315EU, MFG Number BA9-1002450, 12.5" Blade, Heavy Duty Steel Base, Thick Cast Iron Base, Direct Drive Gear Box, Miters up to 45┬░ Left & Right, Coolant Pump, Taper Lock Vise, #SMCS315EU

Stock No:#SMCS315EU

Manufacturer: Baileigh

Capacity: 12 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$3,225.00

11" Brand New Baileigh Heavy Duty Manually Operated Cold Saw, Mdl. CS-275M, MFG Number BA9-1002444, Cuts Ferrous & Non-Ferrous Metals, 11" Blade, Miters Both Ways, Stop Mechanism, Self Centering Vise, Direct Drive Head, #SMCS275M

Stock No:#SMCS275M

Manufacturer: Baileigh

Capacity: 13”x18”

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$5,649.00

11" Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw, Mdl. CS-275SA, 11" Blade, Semi-Automatic Operation, Miters Up to 45┬░ Left & Right, Self Centering Vise, Heavy Duty Cast Iron Head, Backlash Adjustment, #SMCS275SA

Stock No:#SMCS275SA

Manufacturer: Baileigh

Capacity: 13”x18”

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$8,179.00

11" Brand New Baileigh Manually Operated Cold Saw, Mdl. CS-275EU, MFG Number BA9-1002434, 11" Blade, Control Panel, Fully Cast Iron Head, Heavy Cast Base, Manual Feed, Miters up to 45┬░ Left & Right, Flood Coolant System, Material Stop Rod, Heavy Duty Vise, #SMCS275EU

Stock No:#SMCS275EU

Manufacturer: Baileigh

Capacity: 13”x18”

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$2,979.00

14-1/2" Brand New Hydmech Semi-Automatic Column Cold Saw (Ferrous Material) , Mdl. C370-2SI, Semi-Automatic Operation, Heavy Duty Gear Box, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, Variable Speed from 15 - 150 RPM, Anti-Burr Clamp with Double Locking System, Vertical Pneumatic Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel includes Main Disconnect, Programmable Sawing Stroke, Saw Head Feed Rate Control, LED Display for Machine Diagnostics, Adjustable Material Stop with Ruler, Flood Coolant with Electrical Coolant Pump, One Blade Included, #SMC3702SI

Stock No:#SMC3702SI

Manufacturer: HYDMECH

Capacity: 14-1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14-1/2" Brand New Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Adjustable Positive Stop, Instruction & Service Manual, #SMEuromatic370S

Stock No:#SMEuromatic370S

Manufacturer: DAKE

Capacity: 14-1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$19,575.00

19" x 165" Used Jinpu Double Miter Semi-Auto Sliding Saw, Mdl. LJJ2AS-500x4200, #C5129

Used-Jinpu-Used Jinpu Double Miter Semi-Auto Sliding Saw-C5129-01

Stock No:#C5129

Manufacturer: Jinpu

Capacity: 6" X 6"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)
Double Miter

Condition: Used

$19,750.00

12" Used Soco Semi-Automatic Miter Cold Saw, Mdl. MC275AC, Semi Automatic Operation, Auto Cutting Cycle, Automatic Clamping, Manual Feed, Coolant System, #A2748

Used-Soco-Used Soco Semi-Automatic Miter Cold Saw-MC275AC-A2748-01

Stock No:#A2748

Manufacturer: Soco

Capacity: 12"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$4,000.00

13 - 1/2" Used Scotchman (NON-FERROUS, Circular Cold Saws) (For Cutting Aluminum, Brass, Copper, Plastics) High Speed, Mdl. CPO 350 NFPKPD, (1) Horizontal Hydraulic Clamp, 3 Phase Only, Power Clamping, Powered Automatic Head Feed, 230 Volt, Year(2006) #A6805

Used-Scotchman-Used Scotchman (NON-FERROUS, Circular Cold Saws) (For Cutting Aluminum, Brass, Copper, Plastics) High Speed-CPO 350 NFPKPD-A6805-01

Stock No:#A6805

Manufacturer: Scotchman

Capacity: 13 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$7,500.00

12" Used Dake Heavy Duty Semi Automatic Cold Saw, Mdl. MEP 350X Tiger, Automatic/Manual Air Vise, MEP Control, 350mm Blade, #A7049

Used-DAKE-Used Dake Heavy Duty Semi Automatic Cold Saw-MEP 350X Tiger-A7049-01

Stock No:#A7049

Manufacturer: DAKE

Capacity: 12"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$8,750.00

14-1/2" Use Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Year (2010) #A5696

Used-DAKE-Use Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head)-EUROMATIC 370S-A5696-01

Stock No:#A5696

Manufacturer: DAKE

Capacity: 14-1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$11,000.00

26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydraulic Clamps, (1) Horizontal Hydraulic Clamp, One Shot Lube System, Coolant System, 16-20-25 V=m/min, Low Speeds Only! Second Speed Change Not Avail., #A4350

Used-Trennjaeger-Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw-PMC-8-A4350-01

Stock No:#A4350

Manufacturer: Trennjaeger

Capacity: 26"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$14,500.00