12" Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. D300, Quick Acting Manual Vise, Double Hinged Safety Guards, Recirculating Coolant System (Reservoir In Base), Overload Protection Switch, Saw Blade, Robust Gear Box, #SMD300

12" Used Dake Heavy Duty Semi Automatic Cold Saw, Mdl. MEP 350X Tiger, Automatic/Manual Air Vise, MEP Control, 350mm Blade, #A7049

Used-DAKE-Used Dake Heavy Duty Semi Automatic Cold Saw-MEP 350X Tiger-A7049-01

Stock No:#A7049

Manufacturer: DAKE

Capacity: 12"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$8,750.00

13 - 1/2" New Scotchman (NON-FERROUS, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 NFPKPD, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degrees, 90 Degrees Left And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Positive Cog Belt Driven, One Gallon Coolant Tank With Mist Lubrication System, (Scotchman) Warranty: Three Years On Parts, #SMCPO350NFPKPD

New-Scotchman-New Scotchman (NON-FERROUS, SEMI-AUTOMATIC WITH POWER CLAMPING AND POWER HEAD DOWN FEED) Circular Cold Saws (For Cutting Aluminum, Brass, Copper, Plastics)-CPO 350 NFPKPD-SMCPO350NFPKPD-01

Stock No:#SMCPO350NFPKPD

Manufacturer: Scotchman

Capacity: 13 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$12,990.00

13 - 1/2" New Scotchman (NON-FERROUS, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 NFPK, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degrees, 90 Degrees Left And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Positive Cog Belt Driven, One Gallon Coolant Tank With Mist Lubrication System, (Scotchman) Warranty: Three Years On Parts, #SMCPO350NFPK

New-Scotchman-New Scotchman (NON-FERROUS, POWER VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)-CPO 350 NFPK-SMCPO350NFPK-01

Stock No:#SMCPO350NFPK

Manufacturer: Scotchman

Capacity: 13 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$10,590.00

13 - 1/2" New Scotchman (NON-FERROUS, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics), Mdl. CPO 350 NF, Double Self - Centering Vise Assures Burr - Free Cuts, Miter Capabilities 135 Degrees, 90 Degrees Left And 45 Degrees Right, Capable Of Slotting, Two Cutting Speeds, Positive Cog Belt Driven, One Gallon Coolant Tank With Mist Lubrication System, (Scotchman) Warranty: Three Years On Parts, #SMCPO350NF

New-Scotchman-New Scotchman (NON-FERROUS, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Aluminum, Brass, Copper, Plastics)-CPO 350 NF-SMCPO350NF-01

Stock No:#SMCPO350NF

Manufacturer: Scotchman

Capacity: 13 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$9,990.00

12-1/2" Brand New Baileigh European Style Manually Operated Cold Saw, Mdl. CS-315EU, MFG Number BA9-1002450, 12.5" Blade, Heavy Duty Steel Base, Thick Cast Iron Base, Direct Drive Gear Box, Miters up to 45┬░ Left & Right, Coolant Pump, Taper Lock Vise, #SMCS315EU

Stock No:#SMCS315EU

Manufacturer: Baileigh

Capacity: 12 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$3,225.00

11" Brand New Baileigh Heavy Duty Manually Operated Cold Saw, Mdl. CS-275M, MFG Number BA9-1002444, Cuts Ferrous & Non-Ferrous Metals, 11" Blade, Miters Both Ways, Stop Mechanism, Self Centering Vise, Direct Drive Head, #SMCS275M

Stock No:#SMCS275M

Manufacturer: Baileigh

Capacity: 13”x18”

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$5,649.00

11" Brand New Baileigh Heavy Duty Semi-Automatic Cold Saw, Mdl. CS-275SA, 11" Blade, Semi-Automatic Operation, Miters Up to 45┬░ Left & Right, Self Centering Vise, Heavy Duty Cast Iron Head, Backlash Adjustment, #SMCS275SA

Stock No:#SMCS275SA

Manufacturer: Baileigh

Capacity: 13”x18”

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$8,179.00

11" Brand New Baileigh Manually Operated Cold Saw, Mdl. CS-275EU, MFG Number BA9-1002434, 11" Blade, Control Panel, Fully Cast Iron Head, Heavy Cast Base, Manual Feed, Miters up to 45┬░ Left & Right, Flood Coolant System, Material Stop Rod, Heavy Duty Vise, #SMCS275EU

Stock No:#SMCS275EU

Manufacturer: Baileigh

Capacity: 13”x18”

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$2,979.00

14-1/2" Brand New Dake Euromatic Semi-Automatic Cold Saw (Non Ferrous Head), Mdl. Euromatic 370S-L, Outboard Section of Table is Designed so Shorter Lengths Tumble Down a Mesh Discharge Chute, Manual Oiler to Lubricate 1" Thick, Hardened Vertical Ways, Clear Acrylic Hood has Shock Assists for Raising & Lowering and Electrical Interlocks, Table Features 2 Removable Surface Wear Plates, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Tool Kit, Saw Blade Selector Calculator, Adjustable Positive Stop, Instruction & Service Manual, #SMEuromatic370SL

Stock No:#SMEuromatic370SL

Manufacturer: DAKE

Capacity: 14-1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

$19,575.00

14-1/2" Brand New Hydmech Semi-Automatic Column Cold Saw (Ferrous Material) , Mdl. C370-2SI, Semi-Automatic Operation, Heavy Duty Gear Box, Miter Capabilities - 45 Degrees Left/45 Degrees Right & 60 Degrees Left, Variable Speed from 15 - 150 RPM, Anti-Burr Clamp with Double Locking System, Vertical Pneumatic Vise, Enclosed Steel Base with Chip Drawer & Coolant Tank, Replaceable Blade Brush, Ergonomically Positioned Control Panel includes Main Disconnect, Programmable Sawing Stroke, Saw Head Feed Rate Control, LED Display for Machine Diagnostics, Adjustable Material Stop with Ruler, Flood Coolant with Electrical Coolant Pump, One Blade Included, #SMC3702SI

Stock No:#SMC3702SI

Manufacturer: HYDMECH

Capacity: 14-1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Call For Price

14" Brand New Doringer (LOW TURN, MANUAL VISE AND MANUAL DOWN FEED) Circular Cold Saw (For Cutting Steel, Stainless, Aluminum, Brass, Copper, Plastics), Mdl. D-350, 58/108 RPM, Quick Acting Manual Vise, Coolant System, Stand, Horsepower: 3, Overload Protection Switch, Saw Blade, #SMD350

Stock No:#SMD350

Manufacturer: Doringer

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: New

Starting At:

$11,850.00

19" x 165" Used Jinpu Double Miter Semi-Auto Sliding Saw, Mdl. LJJ2AS-500x4200, #C5129

Used-Jinpu-Used Jinpu Double Miter Semi-Auto Sliding Saw-C5129-01

Stock No:#C5129

Manufacturer: Jinpu

Capacity: 6" X 6"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)
Double Miter

Condition: Used

$19,750.00

13 - 1/2" Used Scotchman (NON-FERROUS, Circular Cold Saws) (For Cutting Aluminum, Brass, Copper, Plastics) High Speed, Mdl. CPO 350 NFPKPD, (1) Horizontal Hydraulic Clamp, 3 Phase Only, Power Clamping, Powered Automatic Head Feed, 230 Volt, Year(2006) #A6805

Used-Scotchman-Used Scotchman (NON-FERROUS, Circular Cold Saws) (For Cutting Aluminum, Brass, Copper, Plastics) High Speed-CPO 350 NFPKPD-A6805-01

Stock No:#A6805

Manufacturer: Scotchman

Capacity: 13 - 1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$7,500.00

14-1/2" Use Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head), Mdl. Euromatic 370S, 3 Gib Guides for Cutting Head with 2 Adjustable Cast Iron Gib Blocks in Each, Rear Surface of Gearbox is Machined with Interlocking Circles to Evenly Distribute Oil Over the Ways, Large Automatic Clamping Vise Features Adjustable Gib Guides, Removable Face Plates & Anti-Burr Arm, Blade, Coolant, Year (2010) #A5696

Used-DAKE-Use Dake Euromatic Semi-Automatic Cold Saw (Ferrous Head)-EUROMATIC 370S-A5696-01

Stock No:#A5696

Manufacturer: DAKE

Capacity: 14-1/2"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$11,000.00

14" Used Doringer Cold Saw , Mdl. D350, #A7099

Used-Doringer-Used Doringer Cold Saw -D350-A7099-01

Stock No:#A7099

Manufacturer: Doringer

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$5,950.00

14" Used Soco Automatic Ferrous Cold Saw, Mdl. MC-350FA, Automatic Clamping, Automatic Feed, Automatic Cutting, Built In Precision Digital Readout, Coolant, #A3854

Used-Soco-Used Soco Automatic Ferrous Cold Saw-MC-350FA-A3854-01

Stock No:#A3854

Manufacturer: Soco

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$11,500.00

14" Used Soco Non Ferrous Sawing Machine, With Fully Automatic Feed and Cutting Cycle 1/4" - 27". Great for Brass, Aluminum and other Soft Materials, Mdl. MC-350NFA, Please Select, Air Vise, Automatic Hitch Feed from 1/4" - 27", #A6013

Used-Soco-Used Soco Non Ferrous Sawing Machine, With Fully Automatic Feed and Cutting Cycle 1/4

Stock No:#A6013

Manufacturer: Soco

Capacity: 14"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$8,500.00

26" Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw, Mdl. PMC-8, (2) Vertical Hydraulic Clamps, (1) Horizontal Hydraulic Clamp, One Shot Lube System, Coolant System, 16-20-25 V=m/min, Low Speeds Only! Second Speed Change Not Avail., #A4350

Used-Trennjaeger-Trennjaeger Heavy Duty Ferrous Up-Cut Cold Saw-PMC-8-A4350-01

Stock No:#A4350

Manufacturer: Trennjaeger

Capacity: 26"

Category: Saws

Subcategory: Cold & Carbide (Chop Saw)

Condition: Used

$14,500.00